ALT-8000 FMCW/Pulse Radio Altimeter Flightline Test Set

Contact us now

Tomi

Tomi Kivilahti

I work as a sales engineer with components and instruments spanning DC-500GHz, towards our customers in Finland and Baltics. I am located at our sales office in Vantaa, Finland.

+358 9 727 30070
Stäng

Morgan

Morgan Hjelm

I work with sales to our Swedish customers north of Linköping, and towards our customers in Norway. I am also managing our sales of military systems.

+46 8 556 466 16
Stäng

Håkan

Håkan Nilsson

I work with sales to our Swedish customers south of Linköping. I am also taking care of sales towards our customers in Denmark. I am located at our sales office in Gothenburg.

+46 8 556 466 14
Stäng

Joachim

Joachim Hauser

I work with sales towards our Swedish and Norwegian customers for our entire product range within fiber & network testing as well as synchronization equipment.

+46 8 556 466 02
Stäng
ALT-8000 FMCW/Pulse Radio Altimeter Flightline Test Set

ALT-8000 FMCW/Pulse Radio Altimeter Flightline Test Set

ALT-8000 is the world's first and only RF-based portable radio altimeter flightline test set. It weighs approximately 10 lbs. (4.5 kg) with a large 12-inch color touch-screen, making it easy to use.   

The ALT-8000 is the world's first and only RF-based portable radio altimeter flight line test set. It weighs approximately 10 lbs. (4.5 kg) with a large 12-inch color touch-screen, making it easy to use. The ALT-8000 is a universal test set for 4.3 GHz FMCW (frequency modulated continuous carrier wave) radio altimeters and pulse radio altimeters. The simulator is also designed to be software upgradable. For military applications, see the ALT-8015

General - The user interface is Windows® based and provides various pages for control of the test set and display of parametric measurements including: TX power, TX frequency (center), sweep rate, TX pulse width (pulse systems).

Profiles - The Profile page allows the user to create, save, recall or delete named profiles. Each profile is comprised of individual legs. Start, stop altitudes and rates are definable for each leg. A profile can then be executed to simulate a complete landing approach including flare out or a take-off and departure.

RF Coupling - The supplied antenna couplers allow the radio altitude system to be quickly verified without access being required to test ports on the UUT LRU. The RF looped test verifies TX frequency, power, sweep rate, and RF level control provides the means to test UUT sensitivity.

Setup - The setup page allows system, user and RF connection parameters to be set by the user, including RS-232, AID, RF cable loss and altitude offset.

Features

• Tests FMCW radio altimeters including CDF types
• Tests pulse radio altimeters (non-pulse compression types)
• Direct-connect to UUT T/R or to installed system via antenna couplers
• Full RF loop test allows TX, RX, Antenna or Feeder faults to be identified
• Multi-channel operation (via additional test sets)
• Programmable multi-leg climb/descend profiles
• Large touch-screen display with simple user interface
• Remote control interface USB/LAN
• Lightweight and compact about 10 lbs. (4.5 kg)
• Battery 4 hours plus duration
 

Product information »